整片完整片视频欧美在线,成人 av 在线 捆绑,日本一区二区三区电影播放,欧美性生活在线观看视频

施耐德電氣研發正式崗位（非外包），可以選擇在上海或無錫研發中心上班。
1. Maintain the drive product (220V/380V 0.1kw~500kw) for China and global market
維護變頻器產品(220V/380V 0.1kw~500kw)
2. Debug and solve technically challenging issues as part of a multidisciplinary design team
善于分析解決問題
3. Self-motivated and working with different function team
積極主動和不同的team 合作，推進問題解決
4. Making test product and implement power / analog circuit (like IGBT, Mosfet, protection circuit, switched power supply…etc)
測試驗證功率，模擬電路
5. Deeply involved into the Verification/Validation Test to verify the solution and solve product issue finally
參與測試，驗證方案
6. Communicate / discuss with foreign team independently
獨立和國外同事討論溝通
7. Follow Schneider internal maintenance process and quality strategy.
8. Maintain and increase knowledge/expertise of product engineering technologies, competitor analysis.

Skills
1. Master degree of EE with 3 years of drive products design experience is preferred. Bachelor degree will need 5 years experience.
電力電子專業碩士文憑，至少3年以上變頻產品設計經驗。學士學位需要5年以上設計經驗。
2. Good knowledge of power electronic, topology (2-level), component selection (IGBT, Mosfet) and thermal calculation (power loss simulation), protection strategy (short circuit, over voltage, thermal). 3 years experience of drive platform design is a strong nice to have.
精通電力電子知識、拓撲設計、元器件選擇(IGBT, gate driver，Bus Cap, Mosfet)、損耗計算、保護策略（短路，過壓，過溫）。3年以上變頻硬件平臺設計經驗會被優先考慮。
3. Sensors and signal conditioning (grounding schemes, filters, A/D…). Current/Voltage measurement methods.
傳感器與信號處理設計經驗，包括接地，拓撲，濾波器，數字/模擬轉換。常用電流電壓檢測方法
4. Switched power supplies (flyback DC/DC converters, power efficiency, reliability…).
開關電源設計經驗，熟知常用拓撲，器件選型，損耗與效率計算。能夠設計高頻變壓器和電感。
5. EMC principle knowledge, Differential/Common path, Conducted/Radiated Emission…
掌握EMC相關原理，差模、共模路徑分析，傳導與發射問題解決
6. High-speed digital design and circuits (microprocessors, DSPs, memories), familiar with basic controller functions (analog/Digital input or output).
熟知主控板功能設計，包括數字、模擬輸入輸出接口設計，編碼器接口設計。
7. Schematic/PCB design and tools skills(Allegro)
8. Familiar with simulation tools(matlab, plecs, pspice or psim), basic knowledge of motor control
1. Maintain the drive product (220V/380V 0.1kw~500kw) for China and global market
維護變頻器產品(220V/380V 0.1kw~500kw)
2. Debug and solve technically challenging issues as part of a multidisciplinary design team
善于分析解決問題
3. Self-motivated and working with different function team
積極主動和不同的team 合作，推進問題解決
4. Making test product and implement power / analog circuit (like IGBT, Mosfet, protection circuit, switched power supply…etc)
測試驗證功率，模擬電路
5. Deeply involved into the Verification/Validation Test to verify the solution and solve product issue finally
參與測試，驗證方案
6. Communicate / discuss with foreign team independently
獨立和國外同事討論溝通
7. Follow Schneider internal maintenance process and quality strategy.
8. Maintain and increase knowledge/expertise of product engineering technologies, competitor analysis.

Skills
1. Master degree of EE with 3 years of drive products design experience is preferred. Bachelor degree will need 5 years experience.
電力電子專業碩士文憑，至少3年以上變頻產品設計經驗。學士學位需要5年以上設計經驗。
2. Good knowledge of power electronic, topology (2-level), component selection (IGBT, Mosfet) and thermal calculation (power loss simulation), protection strategy (short circuit, over voltage, thermal). 3 years experience of drive platform design is a strong nice to have.
精通電力電子知識、拓撲設計、元器件選擇(IGBT, gate driver，Bus Cap, Mosfet)、損耗計算、保護策略（短路，過壓，過溫）。3年以上變頻硬件平臺設計經驗會被優先考慮。
3. Sensors and signal conditioning (grounding schemes, filters, A/D…). Current/Voltage measurement methods.
傳感器與信號處理設計經驗，包括接地，拓撲，濾波器，數字/模擬轉換。常用電流電壓檢測方法
4. Switched power supplies (flyback DC/DC converters, power efficiency, reliability…).
開關電源設計經驗，熟知常用拓撲，器件選型，損耗與效率計算。能夠設計高頻變壓器和電感。
5. EMC principle knowledge, Differential/Common path, Conducted/Radiated Emission…
掌握EMC相關原理，差模、共模路徑分析，傳導與發射問題解決
6. High-speed digital design and circuits (microprocessors, DSPs, memories), familiar with basic controller functions (analog/Digital input or output).
熟知主控板功能設計，包括數字、模擬輸入輸出接口設計，編碼器接口設計。
7. Schematic/PCB design and tools skills(Allegro)
8. Familiar with simulation tools(matlab, plecs, pspice or psim), basic knowledge of motor control